For priser, ring på 65991616 eller skriv på mail: info@motorsportshop.dk Tarmac Rally
This damper is designed for Tarmac Rally; it can absorb the impact of uneven pavement. It is able to absorb the jolt when across a big bumps, effectively suppress shock body and to increase tire’s traction. Vehicle stability makes you can experience perfect handling. All the settings from our Tarmac Rally racing experience.
Top of the line of Tarmac Rally damper
Monotube design, and lightweight aluminum bottom mount.
Larger piston diameter of 45mm, and shock body 51.5mm.
Full ride height adjustable.
30-way adjustable dampening, designed for Tarmac Rally race.
Both front and rear top mounts are camber adjustable in order to increase it’s handling
One year limited warranty; replacement for defective strut.
Do not recommend in rally gravel use.
Aluminum-Made Top Mount(A6061)
Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling ever. All the pillowball top mounts in McPherson strut with camber adjustable.
Feature of inverted mono tube design
Feature of inverted mono tube design is suitable for use in Tarmac Rally coilover system. It keeps damping stability on the uneven road. With larger piston diameter of 45mm, and shock body 51.5mm, it can bear the side way aggressive strong movement. Increase the amount of oil effectively inhibit the oil temperature rise, it can make coilover keeps excellent performance in intense manipulation.
Fully adjustable lower mount
A moveable lower mount is adopted. Either ride height or pre-load can be adjusted by the adjusting bottom mount. Shock body made by steel, therefore, it can sustain strong side way gravity.
With steel material (SPHC-C), it can enhance its strength. Furthermore, it can avoid unusual movement after wheel oriented for a while driving and improve lower mount distorted problems which is caused when turning.
Aluminum upper mount for wishbone coilover
Because there is no such problems like turning steering wheel, it made by aluminum material (A6061)to reduce the weight and enhance the ability to dissipate heat.
Damping adjustable
Tarmac Rally type damper has 30 different way of damping settings enables our products to bring the best performance for different tarmac rally.
Anti-rust
All thread parts are coated with Fluorine to prevent corrosion or adherence. The lower mount is made with forged or anodized. All the products made with steel are go through rigid test system.
Coil spring
Each application comes with pillow ball top mount which can enable you to experience the driving feel directly. All parts are made by high quality (SAE9254). Tarmac Rally damper is equipped with the springs that have the most perfect spring rates.
Hard rubber
Made with steel (1008A), and forging with high-pressure. With its hardness, it can prevent loose problems when turning McPherson lower mount.
Spring bearing
The piece put between the spring and the locking ring is Teflon bearing, it can eliminate strange noises efficiency and allow a vehicle to move more smoothly when turning
This coilover is special designed for Tarmac Rally. It keeps damping stability on the uneven road. Each kit comes with pillowball top mount on both front and rear, which enables you to experience excellent handling ever. All the pillowball top mounts in McPherson strut with camber adjustable. However, because of the design it is easy to create some slight unusual sound when come across big bumps. Basically, all kind of racing coilover is design for performance at special road and is not suggested to be used on road.
