Powerflex Bøsninger – Præcis styring og bedre vejgreb
Opgrader din undervogn med Powerflex polyurethan-bøsninger, der giver mere præcis styring og markant længere holdbarhed end standard gummibøsninger.
Brug diagrammet til at finde de rigtige dele:
- Find placering: Se oversigten på det tekniske diagram til venstre.
- Match nummeret: Nummeret på diagrammet (f.eks. 1, 2 eller 5) svarer til tallene på produkterne herunder.
- Vælg serie: Vælg Performance til vej, Race til bane eller Heritage for et klassisk look.
Find dine dele i oversigten nedenfor.
PFF60-801G allows on-car adjustment of camber, fit PFF60-801 for a non-adjustable bush.PFF60-802G is caster adjustable and gives additional anti-lift, fit PFF60-802 for a non-adjustable bush.PFF60-803-* is half the length of the bracket and uses a spacer, this fits vehicles from May 2009 onwards. PFF60-803-21 fits Cup models with 21mm Front ARB.PFF60-503-* is with full height bush with no spacer and is used on vehicles up to May 2009. PFF60-820 Fits vehicles with a rubberized bracket, for vehicles with extruded alloy bracket use PFF60-526.
Powerflex
Powerflex Front Arm Front Bush Camber Adjustable (2 stk.)
Powerflex
Powerflex Front Arm Front Bush (2 stk.)
Powerflex
Powerflex Front Arm Rear Bush Anti-Lift & Caster Offset (2 stk.)
Powerflex
Powerflex Front Arm Rear Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 21mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 20.5mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 20mm (2 stk.)
Powerflex
Powerflex Rear Beam Mounting Bush (2 stk.)
Powerflex
Powerflex Rear Shock Upper Mount (2 stk.)
Powerflex
Powerflex Lower Engine Mount Insert (1 stk.)
Powerflex
Powerflex Lower Torque Mount (1 stk.)
Powerflex
Powerflex Lower Torque Mount (1 stk.)
Powerflex
Powerflex Rear Lower Engine Mounting Bush (1 stk.)
Powerflex
Powerflex Upper Engine Mount Insert (1 stk.)
Powerflex
Powerflex Gearbox Mounting Bush Insert (1 stk.)
Powerflex
Powerflex Upper Engine Mount Torque Arm Bush (1 stk.)
Powerflex
Powerflex
Powerflex hjulmontering styretap 12x1.5 gevind
PFF60-801G allows on-car adjustment of camber, fit PFF60-801 for a non-adjustable bush. PFF60-802G is caster adjustable and gives additional anti-lift, fit PFF60-802 for a non-adjustable bush. PFF60-803-* is half the length of the bracket and uses a spacer, this fits vehicles from May 2009 onwards. PFF60-803-21 fits Cup models with 21mm Front ARB. PFF60-503-* is with full height bush with no spacer and is used on vehicles up to May 2009. PFF60-820 Fits vehicles with a rubberized bracket, for vehicles with extruded alloy bracket use PFF60-526.
Powerflex
Powerflex Front Arm Front Bush Camber Adjustable (2 stk.)
Powerflex
Powerflex Front Arm Front Bush (2 stk.)
Powerflex
Powerflex Front Arm Rear Bush Anti-Lift & Caster Offset (2 stk.)
Powerflex
Powerflex Front Arm Rear Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 21mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 20.5mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush 20mm (2 stk.)
Powerflex
Powerflex Rear Beam Mounting Bush (2 stk.)
Powerflex
Powerflex Rear Shock Upper Mount (2 stk.)
Powerflex
Powerflex Lower Engine Mount Insert (1 stk.)
Powerflex
Powerflex Lower Torque Mount (1 stk.)
Powerflex
Powerflex Rear Lower Engine Mounting Bush (1 stk.)
Powerflex
Powerflex Upper Engine Mount Insert (1 stk.)
Powerflex
Powerflex Gearbox Mounting Bush Insert (1 stk.)
Powerflex
Powerflex Upper Engine Mount Torque Arm Bush (1 stk.)
Powerflex
Powerflex hjulmontering styretap 12x1.5 gevind