Powerflex Bøsninger – Præcis styring og bedre vejgreb
Opgrader din undervogn med Powerflex polyurethan-bøsninger, der giver mere præcis styring og markant længere holdbarhed end standard gummibøsninger.
Brug diagrammet til at finde de rigtige dele:
- Find placering: Se oversigten på det tekniske diagram til venstre.
- Match nummeret: Nummeret på diagrammet (f.eks. 1, 2 eller 5) svarer til tallene på produkterne herunder.
- Vælg serie: Vælg Performance til vej, Race til bane eller Heritage for et klassisk look.
Find dine dele i oversigten nedenfor.
The Series 2 RS Turbo has a left hand threaded nut fitted to the right-hand side of the Anti Roll Bar. The inner track control arm bush on the RST S2 uses a bearing type joint. As a result, no replacement bush is available.Fitting PFR19-207 means there is no need to replace the whole arm as there is no standard replacement available from Ford.
Powerflex
Powerflex Front Outer Track Control Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Mounting Bush 24mm (2 stk.)
Powerflex
Powerflex Front Top Shock Absorber Mount (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Mounting Bush 16mm (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Inner Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Chassis Bush (2 stk.)
Powerflex
Powerflex Rear Wishbone To Hub Bushes (4 stk.)
Powerflex
Powerflex Rear Shock Top Mount Upper Bush (2 stk.)
Powerflex
Powerflex udstødningsophæng Længde=72mm Hulafstand=44mm (1 stk.)
The Series 2 RS Turbo has a left hand threaded nut fitted to the right-hand side of the Anti Roll Bar. The inner track control arm bush on the RST S2 uses a bearing type joint. As a result, no replacement bush is available.Fitting PFR19-207 means there is no need to replace the whole arm as there is no standard replacement available from Ford.
Powerflex
Powerflex Front Outer Track Control Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Mounting Bush 24mm (2 stk.)
Powerflex
Powerflex Front Top Shock Absorber Mount (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Mounting Bush 16mm (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Inner Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Chassis Bush (2 stk.)
Powerflex
Powerflex Rear Wishbone To Hub Bushes (4 stk.)
Powerflex
Powerflex Rear Shock Top Mount Upper Bush (2 stk.)
Powerflex
Powerflex udstødningsophæng Længde=72mm Hulafstand=44mm (1 stk.)
The Series 2 RS Turbo has a left hand threaded nut fitted to the right-hand side of the Anti Roll Bar. The inner track control arm bush on the RST S2 uses a bearing type joint. As a result, no replacement bush is available.Fitting PFR19-207 means there is no need to replace the whole arm as there is no standard replacement available from Ford.
Powerflex
Powerflex Front Outer Track Control Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Mounting Bush 24mm (2 stk.)
Powerflex
Powerflex Front Top Shock Absorber Mount (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Mounting Bush 16mm (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Inner Wishbone Bush (2 stk.)
Powerflex
Powerflex Rear Tie Bar To Chassis Bush (2 stk.)
Powerflex
Powerflex Rear Wishbone To Hub Bushes (4 stk.)
Powerflex
Powerflex Rear Shock Top Mount Upper Bush (2 stk.)
Powerflex
Powerflex udstødningsophæng Længde=72mm Hulafstand=44mm (1 stk.)