Powerflex Bøsninger – Præcis styring og bedre vejgreb
Opgrader din undervogn med Powerflex polyurethan-bøsninger, der giver mere præcis styring og markant længere holdbarhed end standard gummibøsninger.
Brug diagrammet til at finde de rigtige dele:
- Find placering: Se oversigten på det tekniske diagram til venstre.
- Match nummeret: Nummeret på diagrammet (f.eks. 1, 2 eller 5) svarer til tallene på produkterne herunder.
- Vælg serie: Vælg Performance til vej, Race til bane eller Heritage for et klassisk look.
Find dine dele i oversigten nedenfor.
PFF1-801 and PFF1-802 are designed to fit genuine Alfa Romeo control arms only. If non-genuine arms are fitted, the pin diameter at the back of the arm may be different and a bespoke sleeve may be required. If this is the case, contact your Powerflex reseller. PFF1-814 fits non-Turbo V6 models only.PFF1-820 fits 1.6 to 2.0 4cyl petrol engines.PFF1-821 fits 1.8 & 2.0 16v models with the extruded engine mount stabiliser.PFF1-822 fits 2.0TS with a welded steel engine mount stabiliser.PFF1-803 fits 1995 - 2002 vehicles with a 20mm anti-roll bar.PFF1-804 fits 2003 - 2005 vehicles with a 15mm anti-roll.PFF1-805 & PFF1-806 fit 1995-2002 models only. (not later models with ball joint type link rod)
Powerflex
Powerflex Front Lower Wishbone Front Bush (2 stk.)
Powerflex
Powerflex Front Lower Wishbone Rear Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (03-05) 15mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (95-02) 20mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar End Link To Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar To Link Rod Bush (2 stk.)
Powerflex
Powerflex Rear Lower Swing Arm Outer Bush (2 stk.)
Powerflex
Powerflex Swing Arm Shock Mount Bush (2 stk.)
Powerflex
Powerflex Rear Lower Inner Swing Arm Bush (2 stk.)
Powerflex
Powerflex Rear Lower Spring Inner Mount (2 stk.)
Powerflex
Powerflex Rear Lower Spring Mount Outer (2 stk.)
Powerflex
Powerflex Rear Upper Wishbone Inner (4 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 21mm (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 18mm (2 stk.)
Powerflex
Powerflex Engine Mount Engine To Stabilizer Bush (1 stk.)
Powerflex
Powerflex Engine Mount Kit V6 Only (1 stk.)
Powerflex
Powerflex Engine Mount Stabilizer To Chassis Bush (1 stk.)
Powerflex
Powerflex Engine Mount Stabilizer To Chassis Bush (1 stk.)
Powerflex
Powerflex Camber Bolt Kit M10 (2 stk.)
Powerflex
Powerflex hjulmontering styretap 12x1.25 gevind
Powerflex
Powerflex udstødningsophæng Længde=64mm Hulafstand=50mm (1 stk.)
PFF1-801 and PFF1-802 are designed to fit genuine Alfa Romeo control arms only. If non-genuine arms are fitted, the pin diameter at the back of the arm may be different and a bespoke sleeve may be required. If this is the case, contact your Powerflex reseller. PFF1-814 fits non-Turbo V6 models only.PFF1-820 fits 1.6 to 2.0 4cyl petrol engines.PFF1-821 fits 1.8 & 2.0 16v models with the extruded engine mount stabiliser.PFF1-822 fits 2.0TS with a welded steel engine mount stabiliser.PFF1-803 fits 1995 - 2002 vehicles with a 20mm anti-roll bar.PFF1-804 fits 2003 - 2005 vehicles with a 15mm anti-roll.PFF1-805 & PFF1-806 fit 1995-2002 models only. (not later models with ball joint type link rod)
Powerflex
Powerflex Front Lower Wishbone Front Bush (2 stk.)
Powerflex
Powerflex Front Lower Wishbone Rear Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (03-05) 15mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (95-02) 20mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar End Link To Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar To Link Rod Bush (2 stk.)
Powerflex
Powerflex Rear Lower Swing Arm Outer Bush (2 stk.)
Powerflex
Powerflex Swing Arm Shock Mount Bush (2 stk.)
Powerflex
Powerflex Rear Lower Inner Swing Arm Bush (2 stk.)
Powerflex
Powerflex Rear Lower Spring Inner Mount (2 stk.)
Powerflex
Powerflex Rear Lower Spring Mount Outer (2 stk.)
Powerflex
Powerflex Rear Upper Wishbone Inner (4 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 21mm (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 18mm (2 stk.)
Powerflex
Powerflex Engine Mount Engine To Stabilizer Bush (1 stk.)
Powerflex
Powerflex Engine Mount Stabilizer To Chassis Bush (1 stk.)
Powerflex
Powerflex Engine Mount Stabilizer To Chassis Bush (1 stk.)
Powerflex
Powerflex Camber Bolt Kit M10 (2 stk.)
Powerflex
Powerflex hjulmontering styretap 12x1.25 gevind
Powerflex
Powerflex udstødningsophæng Længde=64mm Hulafstand=50mm (1 stk.)
PFF1-801 and PFF1-802 are designed to fit genuine Alfa Romeo control arms only. If non-genuine arms are fitted, the pin diameter at the back of the arm may be different and a bespoke sleeve may be required. If this is the case, contact your Powerflex reseller. PFF1-814 fits non-Turbo V6 models only.PFF1-820 fits 1.6 to 2.0 4cyl petrol engines.PFF1-821 fits 1.8 & 2.0 16v models with the extruded engine mount stabiliser.PFF1-822 fits 2.0TS with a welded steel engine mount stabiliser.PFF1-803 fits 1995 - 2002 vehicles with a 20mm anti-roll bar.PFF1-804 fits 2003 - 2005 vehicles with a 15mm anti-roll.PFF1-805 & PFF1-806 fit 1995-2002 models only. (not later models with ball joint type link rod)
Powerflex
Powerflex Front Lower Wishbone Front Bush (2 stk.)
Powerflex
Powerflex Front Lower Wishbone Rear Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (03-05) 15mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar Bush (95-02) 20mm (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar End Link To Arm Bush (2 stk.)
Powerflex
Powerflex Front Anti Roll Bar To Link Rod Bush (2 stk.)
Powerflex
Powerflex Rear Lower Swing Arm Outer Bush (2 stk.)
Powerflex
Powerflex Swing Arm Shock Mount Bush (2 stk.)
Powerflex
Powerflex Rear Lower Inner Swing Arm Bush (2 stk.)
Powerflex
Powerflex Rear Lower Spring Inner Mount (2 stk.)
Powerflex
Powerflex Rear Lower Spring Mount Outer (2 stk.)
Powerflex
Powerflex Rear Upper Wishbone Inner (4 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 21mm (2 stk.)
Powerflex
Powerflex Rear Anti Roll Bar Bush 18mm (2 stk.)
Powerflex
Powerflex Engine Mount Engine To Stabilizer Bush (1 stk.)
Powerflex
Powerflex Engine Mount Kit V6 Only (1 stk.)
Powerflex
Powerflex Engine Mount Stabilizer To Chassis Bush (1 stk.)
Powerflex
Powerflex Camber Bolt Kit M10 (2 stk.)
Powerflex
Powerflex hjulmontering styretap 12x1.25 gevind
Powerflex
Powerflex udstødningsophæng Længde=64mm Hulafstand=50mm (1 stk.)